Featured
C4 Reverse Manual Valve Body Shift Pattern
C4 Reverse Manual Valve Body Shift Pattern. Shift pattern does not have to worry about relearning. Full manual valve body w/o engine braking in 1st gear.

Full manual valve body w/o engine braking in 1st gear. Fits 1970up c4 and c5 transmissions. Shift transmission into reverse and let run approximately (3) minutes.
The New Valve Body Has Multiple Benefits:
Anyone used to a standard fwd. Good for trucks or any application in which extra sprag protection is required. Governor and vacuum modulator components not required.
The Shift Pattern Be Prni23.
C4 reverse pattern full manual valve body. Does not require governor or modulator to operate. This kit is not intended for installation in a transmission in poor general condition.
C4 Reverse Manual Valve Body.
I'm changing over to a reverse manual valve body transmission and looking for comments / advise on either of these two shifters. This is the same valve body as used in the dynamic c4 comps and roller mite units. Tci® full manual valve bodies allow for quicker shift timing and the ability to run higher line pressures than with an automatic shift.
Our No Flare Reverse Manual Valve Body Is Also A Direct Bolt In And Is Featured In Our C4 And C6.
The dynamic racing transmission’s reverse manual valve body has been designed to allow you to have full manual control over all transmission shifts regardless of rpm. Fits all 1970up c4 transmissions. I'm currently running a forward pattern hurst quarter stick and like it but won't work with reverse valve body and will need a new one.
Running In Reverse (3) Minutes Will Give Any Contaminants In The Transmission, Converter, Cooler Or Lines A Chance To Settle Into The Transmission Pan And Not Be Introduced To The Automatic Shift Control Part Of The Valve Body Or Governor, Causing The Shift Valves To Stick.
Prn123 bte 42100 kit contains: A forward or reverse manual valve body can be used in a street vehicle for quick tire chirping shifts, full control over when the shifts take place and to make driving your high performance street car even more enjoyable. Valve body torque must not exceed 10 ft.
Comments
Post a Comment